RV Insulation Upgrades, Air Sealing & Condensation Control
Quiet, even temperatures start with proper RV insulation. Thin batts, air leaks, and uninsulated underbellies make furnaces roar in winter and air conditioners struggle in summer.
Traveling RV Technicians (TRVT) provides mobile insulation upgrades, air sealing, thermal and sound treatments, condensation fixes, duct tuning, and tank/bay protection. We target the biggest heat leaks first—roof, walls, floor, windows, and penetrations—then add the right materials so your coach stays comfortable with less energy and noise.
Assessment: IR Imaging, Moisture & Air Leaks
We begin with data, not guesses.
Thermal imaging (IR) to reveal cold/hot spots, missing batts, and aluminum thermal bridges.
Moisture checks for hidden leaks before any insulation goes in.
Smoke/pressure tests for door, slide, and cabinet air leaks.
You get a clear plan ranked by impact: roof/ceiling, walls, floor, windows, and underbelly.
Materials That Work in RVs (When & Where)
We match insulation to each cavity and risk:
Closed-cell spray foam: high R/inch, air + vapor control, stiffens panels; great for floors, step wells, doghouse, and small cavities.
Polyiso/XPS foam board with sealed seams: roof, hatch lids, underbelly panels, and removable bays.
Thinsulate™/synthetic fiber (SM600L class): walls/ceilings in vans and curved spaces; won’t hold water and adds sound control.
Mineral wool: fire/heat areas (near ovens) and sound control partitions.
Reflective radiant barriers (Reflectix-type): only effective with an air gap; we install correctly or skip it.
Mass loaded vinyl (MLV): targeted sound under seats or over wheel wells (weight-aware).
Right material + right location = better thermal insulation and quieter rides.
Walls & Slides: Lightweight, Serviceable Insulation
Wall cavities are thin; serviceability matters. We:
Use Thinsulate-style or thin foam with sealed seams to keep panels removable.
Insulate slide floors/facings and add wear strips where rollers pass.
Air-seal wiring holes, cabinet backs, and plumbing chases to stop drafts.
Respect drainage paths so any future leak exits—not hides in the wall.
Floor, Wheel Wells & Doghouse (Big Comfort Gains)
Cold floors and road noise come from below. We:
Add closed-cell foam or foam board to the floor from the underbelly side.
Wrap wheel wells with MLV + foam decoupler for sound and heat.
Insulate the engine doghouse on Class A/C rigs with heat-rated barriers and new gaskets.
Seal penetrations at step wells and battery bays.
Walking barefoot stops feeling like a dare.
Underbelly, Tanks & Bay Heating
Frozen lines end trips. We:
Upgrade to enclosed/insulated underbelly with sealed coroplast and foam board.
Install 12-volt tank heating pads, valve heaters, and PEX heat tape where needed.
Add ducted warm air or low-draw bay heaters for true heated underbelly function.
Label circuits at the breaker panel/power distribution centers and fuse correctly.
Now your water system survives shoulder seasons and real winter stops.
Windows, Shades & Draft Control
Glass is the biggest single loss. We:
Add cellular (honeycomb) shades, insulated curtains, and draft stops around frames.
Build removable acrylic storm inserts or framed panels for winter camping.
Replace failed dual-pane units (we do not defog sealed panes).
Air-seal trim rings and weep paths so frames don’t channel cold air.
Better window strategy = big comfort without overworking HVAC.
Doors, Hatches & Seals (Air Sealing That Sticks)
We quiet leaks with:
New bulb/D-seals, sweeps, and drip caps on entry and baggage doors.
Foam gaskets behind electrical and plumbing plates.
Proper adhesives (butyl + polyurethane) and rolled bonds so seals stay set.
Tighter doors and hatches cut drafts, dust, and electrical issues caused by moisture.
HVAC Duct Tuning & Vent Insulation
Comfort depends on airflow and losses. We:
Seal and insulate ducted A/C runs; stop bypass in the A/C plenum.
Add reflective boots at registers; balance flows to the bedroom and bath.
Insulate furnace ducts proximal to the exterior wall and add bay returns where needed.
Paired with insulation, your air conditioner and furnace run quieter and cycle less.